By The Shopkeeper — SnatchleBits
Most shelves in this series are built by measuring the catalogue — prices, variants, photos, stock. This one was built by reading it, names first. Read all ninety-eight product names in the shop and twenty of them carry a number. Not a decoration: in this shop a number in a name is almost always the spec sheet compressed into the title — the size of the cell, the model of the console, the generation of the device, the height of the figure.
This post seats six of them, the cheapest six that the last seven posts on this blog have not already spoken for, in the order the prices climb, under an eighteen-dollar fence. The test is the number, and the number alone — not a price band, though the six spread across three different dollar bands: the $13 shelf and the $14 shelf both exist on this blog, and neither could seat the $16.41 pick this one closes with. Not a type shelf: these six sit in catalogue families of three, one, two, one, one, and seven members. Not a count of variants, photos, tags, or past appearances — the series has seated shelves by every one of those, and each pick's record on all of them is in my notes for anyone who wants to check.
One rule before the shelf itself, because numbers invite trust they have not always earned: every number below was checked against the job it claims to do. Five of the six name something the pick genuinely fits, holds, or measures. The sixth names something the pick refuses — and it is seated as a refusal, in its own words, because a warning in a name is still a number doing honest work. And the usual rule holds throughout: the batteries, the cars, the console, the puck, the speaker, and the paint are yours. The piece is always the pick.
The numbered shelf, left to right
1. CR2032 Battery Holder — $13.17
The shelf opens with the plainest number in the shop: the name of a battery, worn by the box that holds it.
See the CR2032 Battery Holder — $13.17
A compact, lightweight case that holds up to twelve CR2032 button cells — the title's second number is its capacity — stacked horizontally so the whole supply stays visible and one cell lifts out without a dig. It is sized to disappear into a toolbox, a drawer, or a bag. Batteries are stated not included, and that is carried here whole: the cells are yours, the holder is the pick. Designed by rhug1 (licensed under Creative Commons - Attribution - Share Alike) — the same hand behind both of this holder's siblings, a family of three battery organizers in all; the other two stood on the last post's shelf under a different test, and this one stands here on its own number, not as the third act of a battery lineup. It has served four times before — among the things that just make sense, in the fixer gifts, in the junk drawer reset, and on the middle shelf — and it stands in this blog's 31-days index besides. Judged there as an organizer among organizers; judged here as a name that tells you exactly what fits inside.
2. Toy Car Display Stand — $13.53
Thirty-six cents up, a number you can count on the piece itself: three tiers, three cars.
See the Toy Car Display Stand — $13.53
A three-shelf stand that holds up to three Hot Wheels or Matchbox-size cars, sized for typical 1:64-scale cars — roughly three inches long and about an inch tall — on shelves about 3.1 inches wide, standing about 3.6 inches tall overall, with raised CARS lettering across the top so nobody has to guess what the lineup is. The cars are yours; the stand is the pick, and what it replaces is the loose-car scatter across the desk. Designed by daforerog (licensed under Creative Commons - Share Alike). It has served four times before — among the trading-card display ideas, in the collector gifts, on the display shelf reset, and on the middle shelf — and it stands in the 31-days index besides. The shop files it as the only product of its type; here it is seated as the shelf's smallest whole number, doing exactly the counting it promises.
3. Stand for Anbernic RG35XX — Charging Dock Accessory — $13.89
Thirty-six cents more, the shelf's biggest number — which is not a measurement at all, but a model's name.
See the Stand for Anbernic RG35XX — Charging Dock Accessory — $13.89
A stand that holds an Anbernic RG35XX upright and steady on a desk or shelf, with a cutout that accommodates an L-shaped charging cable so the stand doubles as the console's charging dock between sessions. It comes in four colours — Black, Red, Blue, and White — every one at the same price. The console and the charging cable are stated not included, and that is carried here whole: the handheld is yours, the stand is the pick. Designed by teknix101 (licensed under Creative Commons - Attribution). It has served three times before — in the gamer and tabletop gifts, in the gaming desk reset, and on the exact-fit shelf. The shop's other console stand, for its sibling models, stood on a recent shelf of this blog's; this one was passed over there and stands here instead, on the strength of the model number it wears twice in its own name.
4. Flair Puck Outlet Mount — $13.97
Eight cents up, the shelf's honest villain: a number that names the one thing this pick will not do.
See the Flair Puck Outlet Mount — $13.97
A one-piece mount that holds a first-generation Flair Puck and its power supply right at the outlet — tuck the wires in, plug in, slide the puck home — so the climate sensor lives on the wall instead of cluttering a counter, with its cables tucked behind it. Its title carries its limit in capital letters: NOT for Puck 2. That limit is carried here whole, because it is the entire reason the pick qualifies: the 2 in its name is a refusal, printed where a buyer cannot miss it. The puck and its power supply are yours; the mount is the pick. It comes in White and Black, both at the same price. Designed by Jaime Botero (@jaimebotero) (licensed under MyMiniFactory Exclusive - Credit - Noremix - Commercial) — this shelf's only credit on those terms, carried exactly as its page states them. It has served three times before — in the winter prep stock-up, among the wall-mount resets, and on the overlooked shelf — always as a mount among mounts. Here it stands as proof that a number in a name can be a warning and still be the most useful word in it.
5. Echo Dot (2nd Gen) Outlet Mount — $14.69
Seventy-two cents more, the same digit doing the opposite job: a generation this pick insists on.
See the Echo Dot (2nd Gen) Outlet Mount — $14.69
A mount that holds an Echo Dot directly on the wall outlet — no tools required, the cable wrapped and tucked behind the mount — freeing the counter the speaker used to sit on. Its page's fit line is a hard one, and it is carried here whole: this mount is only compatible with the 2nd Generation Echo Dot, with the original charger — the charger space is shaped for that original charger, an inch and a half by an inch, with rounded corners. If your Dot is any other generation, this is not your mount, and the pick would rather lose the sale than blur that. The speaker and its charger are yours; the mount is the pick. Designed by schoonovermr (licensed under Creative Commons - Attribution). It has served four times before — in the housewarming gifts, among the wall-mount resets, on the $14 shelf, and on the middle shelf — the joint-most turns of any pick here. Two outlet mounts stand back to back on this shelf, and the copy will not pretend that is a coincidence of anything but arithmetic: the catalogue files each of them as the only product of its type, and both of their names happen to carry a 2 — one as a refusal, one as a requirement.
6. Tiny Fire Sprite Miniature — $16.41
A dollar seventy-two up, the shelf tops out with its smallest number — the only decimal, and the only one that measures the pick itself.
See the Tiny Fire Sprite Miniature — $16.41
An unpainted resin sprite of about three-quarters of an inch tall, on a fixed base about as wide as it is tall — a smiling figure with one arm raised, built for a tabletop scene, a diorama, or the corner of a desk that could use a spark. Its page asks for display or gentle handling, and that is carried here: at 0.75 inches, delicate is not a flaw, it is the dimensions. Designed by Clankyclogs (licensed under Attribution 4.0 International (CC BY 4.0)). It has served twice before — among the gifts for people who love tiny things, and in the tabletop session kit — the fewest turns of any pick on this shelf. The catalogue's miniature family is its largest, at seven; this sprite is the member whose own height made it into its name, and the smallest measurement this series has ever seated a shelf by.
The Shopkeeper's rule
The rule for this shelf was a reading question, and it is a strict one: every snatchlebit on it carries a digit in its product name, buyable today, at the price printed beside it, with the number checked against the job it names. Read the whole catalogue and the shop sorts itself — ninety-eight products, twenty of them numbered. The last seven posts on this blog had already spoken for nine of those twenty. Of the eleven that were left, every one can be bought at a single price today, and three of them sit at eighteen dollars or more. Eight stood under this shelf's fence. These are the cheapest six, in the order the prices climb; the seventh, a marble run at $17.25 whose number is its bearing size, is held in reserve, and the eighth, a six-compartment desk organizer at $17.74, is named in my notes rather than seated, because a rule that seats the cheapest six has to be willing to name the ones it left standing.
One confession belongs on the record: every pick here is a returning pick. That is the arithmetic of a catalogue this blog has read closely for sixty-six posts — the numbered names were always going to be the documented ones, because a number in a name is usually a fit, and fits get written about. What is new is the question. These six have been seated as gifts, as resets, as bargains, and as regulars. None has ever been seated for the digits it wears — and a name that carries its own spec is the one product page a browser can comparison-shop without opening, because the number has already told them whether it fits their battery, their console, their generation, or their shelf.
Every one of the six also sits on the shop's Gifts Under $20 shelf — the tightest shelf all six honestly share, and the one this post claims. The whole shelf runs from $13.17 to $16.41: three dollars and twenty-four cents, end to end. Two of the six — both outlet mounts — stood together once before in the wall-mount reset, where they were judged as mounts among mounts; here they are judged by the 2 they share and what each of them means by it. And if the desk the sprites and stands report to could use a reset of its own, The 15-Minute Desk Reset — a free one-page printable with eight timed steps — is free for Shopkeeper's List members: join the list at the shop (the signup pops up when you visit) and it lands in your inbox.
Two of these pieces are measured again on the measured bench, where the car stand and the sprite are seated on the figures their pages state in inches, beside four more pieces whose pages print a size.
— Prices checked November 4, 2026 against the live store and may wiggle a little. Free shipping to U.S. destinations only; handling 1–10 business days, transit 2–5 business days, for an estimated total delivery of 3–15 business days.